| Customization: | Available |
|---|---|
| Type: | Oilfield Drilling |
| Durability: | Extended Service Life |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| 109505-3 | BAIL, 500 TON-120.0'' LONG | 115911 | CABLE TRAY |
| 109505-3LT | BAIL, 500 TON-120" LONG, LOW TEMP | 116427 | STUD, GROUNDING |
| 109505-4 | BAIL, 500 TON-88.0'' LONG | 118866 | EARTHING BAR ASSY |
| 30178669 | BAIL, MODIFIED, 500 TON, 120" LONG | 118993 | CABLE, 70mm2 YELLOW W/ GREEN TRACER |
| 110077 | LUG, COUNTERBALANCE | 124994 | J-BOX ASSEMBLY |
| M614003027 | LUG, COUNTERBALANCE | 127386 | 3M POTTING COMPOUND |
| 110070 | BUTTON, COUNTERBALANCE | 30182634 | ELEC / MANIFOLD SUB-ASSY |
| 50012-20-C5D | SCREW, HEX HEAD CAP | 110022-1B | CONNECTOR, SINGLE PIN, POWER, BLACK |
| 50912-C | WASHER, LOCK - REGULAR 3/4" | 110022-1R | CONNECTOR, SINGLE PIN, POWER, RED |
| 109506 | PIN, BAIL, (CARRIAGE) | 110022-1W | CONNECTOR, SINGLE PIN, POWER, WHITE |
| 110123 | RETAINER, PIN, BAIL (CARRIAGE) | 119888-100-38 | CABLE TRAY (3/16 SS 4'' X 38'' VENTILATED) |
| 109507 | BUSHING, BAIL PIN | 122718-01-20 | CABLE, PIGTAIL ASSY COMP (42 COND) |
| 53201 | FITTING, GREASE, STRAIGHT | 124459-01-20 | CABLE, PIGTAIL ASSY COMP (18 COND) |
| 50008-9-C5D | SCREW, HEX HEAD CAP | 129991-07 | GLAND, EEXE ARMOURED CABLE, 50MM |
| 50908-C | WASHER, LOCK, REGULAR, 1/2 | 53219-3 | FITTING, GREASE-STRAIGHT EXTENDED |
| Z6001 | SAFETY LOCKWIRE OD 0.051'' | 53908-B | NIPPLE, CLOSE |
| Z6000.9 | SAFETY LOCKWIRE OD 0.047'' | 56600-12-8 | BUSHING, REDUCING, ELECTRICAL |
| 3012453-BSC | CARRIAGE ASSY, RIGHT, 30.00'' SETBACK | 56600-16-12 | BUSHING, REDUCING, ELECTRICAL |
| 3012453-502 | CARRIAGE ASSY, RIGHT, 39.50'' SETBACK | 56606-8 | ELBOW, CAPPED |
| 3012453-501 | CARRIAGE ASSY, RIGHT, 33.75'' SETBACK | 56609-11 | TERMINAL WIRE RING |
| 3012453-503 | CARRIAGE ASSY, RIGHT, 41.00'' SETBACK | 56609-25 | TERMINAL, WIRE-RING |
| 124538-BSC | CARRIAGE ASSY, LEFT, 30.00'' SETBACK | 56611-8 | ELBOW, 45' INT ELECT |
| 124538-502 | CARRIAGE ASSY, LEFT, 39.50'' SETBACK | 56625-2.5-04 | CABLE, SHIPBOARD-MULTICORE |
| 124538-501 | CARRIAGE ASSY, LEFT, 33.75'' SETBACK | 56626-03 | CABLE, SHIPBOARD-TWISTED/SHIELDED |
| 124538-503 | CARRIAGE ASSY, LEFT, 41.00'' SETBACK | 83444-01 | GLAND, EEXE ARMOURED CABLE, 20MM |
| 51222-12-16 | DOWEL PIN, HARDENED | 83444-03 | GLAND, CABLE, ARMORED, 20MM |
| 939390-10 | WASHER, FLAT, HARDENED | 83444-05 | GLAND, EEXE ARMOURED CABLE, 25MM |
| 50016-20-C | CAPSCREW, HEX HEAD | 83444-07 | GLAND, CABLE, ARMORED, 32MM |
| 141510 | CARRIAGE SPACER, 39.50" SETBACK | 86625-01 | GLAND, CABLE-JACKETED (UL) (1/2 NPT) |
| 124535 | CARRIAGE, LEFT, 30'' SETBACK, DS | 86625-02 | GLAND, CABLE-JACKETED (UL) |
| 124535-502 | CARRIAGE, LEFT, 39.50'' SETBACK, DS | 86871-20 | WASHER, NYLON SEALING |
| 124535-500 | CARRIAGE, LEFT, 33.75'' SETBACK, DS | 86871-25 | WASHER, NYLON SEALING 25 MM |
| 124535-503 | CARRIAGE, LEFT, 41.00'' SETBACK, DS | 86871-32 | WASHER, NYLON SEALING |
| 30155438 | CAM FOLLOWER 6'' | 86871-50 | WASHER, NYLON SEALING |
| 51132-C | WASHER, LOCK, HI-COLLAR, D 2" | 86872-20-S | LOCKWASHER, INTERNAL STAR (20MM) SS |
| 80569 | JAM NUT 2 - 12UN-2B | 86872-25-S | LOCKWASHER, INTERNAL STAR (25MM) |
| 109944 | FLANGED BUSHING 2.75ID | 86872-32-S | LOCKWASHER, INTERNAL STAR |
| 124537 | BOGEY | 86872-50-S | LOCKWASHER, INTERNAL STAR |
| 112875 | PIN, BOGEY, TDS 11 CARRIAGE | 87074-06B | WASHER, LOCK, STAR |
| 51024-C | WASHER, FLAT | 87074-8-B | WASHER, LOCK - STAR (BRASS) (1/2) |
| 55324-C | NUT, HEX, STOVER C 1 1/2-12 | 94872-3 | LUG, CONNECTOR, COPPER |
| 30158767-04 | BEARING, CAM FOLLOWER | Z6000.8 | LOCKWIRE Ø.031 |
| 30179918 | BOLT, SHOULDER | 78317-20 | LOCKNUT |
| 125727-3 | FERRULE BAR | 78317-25 | LOCKNUT 25MM |
| 30157306 | PIN, LYNCH, STANDARD | 78317-32 | LOCKNUT |
| 125727-1 | PLATE, CARRIAGE | 78317-50 | LOCKNUT |
| 125727-2 | PLATE, CARRIAGE | 78725-04 | FERRULE |
| 51220-2 | CABLE, STAINLESS, D 0.063 X 24'' / 48'' / 72'' LONG, NYLON COATED | 56625-1.5-03 | CABLE, SHIPBOARD-MULTICORE |
| 51219-2 | FERRULE, CABLE | 15193 | HPU PUTTY, ELECTRICAL INSULATION |
| 50812-N-C | WASHER, FLAT | 78733 | CLAMP, SUPPORT |
| 50512-C | NUT, HEX, SLOTTED | 50004-10-C5D | SCREW, CAP-HEX HEAD |
| 30152845 | Pin | 50004-14-C5D | SCREW, CAP-HEX HEAD |
| 51402-12-S | PIN, COTTER | 50004-8-C5 | SCREW, CAP-HEX HEAD |
| 50008-10-C5D | CAPSCREW, HEX HEAD | 50004-8-C5D | SCREW, CAP-HEX HEAD |
| 50108-10-CD | 25 50108-10-CD 026211.0820DH2 CAPSCREW, SOCKET HEAD 2 (ALL) | 50005-10-C5 | SCREW, CAP-HEX HEAD |
| 113370 | 26 113370 M102403 STRAP, ACCUMULATOR, 6" 1 (ALL) | 50005-4-C5D | SCREW, CAP-HEX HEAD |
| 50006-5-C5D | 27 50006-5-C5D 008121.0610DH2 CAPSCREW, HEX HEAD 2 (ALL) | 50010-44-C5D | SCREW, CAP-HEX HEAD |
| 50906-C | WASHER, LOCK, SPLIT, GR8, 3/8 | 50010-52-C5D | SCREW, CAP-HEX HEAD |
| 88710 | 29 88710 M105798 STRAP, CARRIAGE 2 (ALL) | 50182-8-03 | SCREW, CAP-BUTTON HEAD |
| 129375 | 30 129375 M105799 BRACKET, ANGLE 1 (ALL) | 50206-B | NUT, HEX - BASS (3/8-16) UNC |
| GREASE CAP | GREASE CAP | 50606-8-C | SCREW, CAP - FLAT HEAD |
| 124536 | CARRIAGE, RIGHT, 30'' SETBACK, ODS | 50804-R-C | WASHER, FLAT-REGULAR |
| 124536-502 | CARRIAGE, RIGHT, 39.50'' SETBACK, ODS | 50810-R-C | WASHER, FLAT (5/8) |
| 124536-500 | CARRIAGE, RIGHT, 33.75'' SETBACK, ODS | 50910-S | WASHER, LOCK - REGULAR |
| 124536-503 | CARRIAGE, RIGHT, 41.00'' SETBACK, ODS | 51804-C | NUT, HEX-SELF LKG (UNC-2B) |
| 301555438 | CAM FOLLOWER 6'' | 51805-C | NUT, HEX-SELF LOCKING (UNC-2B) |
| 53000-2-C | PLUG, EXT PIPE, CTSK / HEX | 53301-10-6 | SCREW, DRIVE-TYPE U |
| 110704 | CYLINDER ASSEMBLY, COUNTERBALANCE | 107783-5C11R | PUMP, HYD. VANE, 1.0 CU. IN./IN. |
| 110703 | CYLINDER ASSEMBLY, COUNTERBALANCE | 109542 | PUMP, HYD. PISTON, PRES. COMP. |
| 59144P290099 | HOSE ASSY | SEE CHART | AC-MOTOR, 10 HP (EXPLOSION PROOF) |
| 59124P290093 | HOSE ASSY | 112640 | ADAPTER, PUMP/MOTOR |
| 59143P290086 | HOSE ASSY | 110023 | FLEX COUPLING |
| 81560 | LABEL | 15230 | ROTATION ARROW |
| 76717 | LINK, PEAR | 51300-152-B | O-RING |
| 110687 | CYLINDER, 4'' COUNTERBALANCE | 50006-24-C8D | SCREW, CAP HEX-HEAD |
| 111935 | CLEVIS, ROD END, CYLINDER, COUNTERBALANCE | 50070-025F06 | SCREW, CAP HEX-HEAD |
| 110716-2 | MANIFOLD, RELIEF, COUNTERBALANCE | 50806-N-C | WASHER, FLAT, 3/8" |
| 51300-214B | O RING | 51007-C | WASHER, LOCK, HEAVY |
| 94522-21N | CARTRIDGE, VALVE, PHM31 | 53301-4-4 | DRIVE SCREWS |
| 111936 | TUBE, CYLINDER, COUNTERBALANCE | 55004-4-C5D | SCREW, CAP HEX-HEAD |
| 56519-12-12S | ELBOW, O-RING BOSS, 37DEG | M105698 | PUMP COUPLER |
| 30172176-BSC | PIN, CLEVIS, CYLINDER, COUNTERBALANCE | 109755 | 460 V, 60 HZ, 3 PHASE |
| 50516-C | NUT, HEX, SLOTTED | 109755-1 | 550 V, 60 HZ, 3 PHASE |
| 51437-16-S | PIN, COTTER | 109755-2 | 575 V, 60 HZ, 3 PHASE |
| 94681-12 | BLIND FLANGE KIT | 109547-2 | MANIFOLD, TDS-9 (MACHINING) |
| 30172176-502 | PIN, CLEVIS, CYLINDER, COUNTERBALANCE | 127908-J2 | SOLENOID, VALVE, 3-POS 24 VDC |
| 87196-12-S | PLUG, SAE-12 HEX SOCKET | 127908-D2 | SOLENOID VALVE, 2-POS., 24VDC |
| 88484 | SHACKLE (13.5 TON) | 30171921 | REWORK MANUAL VALVE, 3-POS |
| 80392 | LINK, CONNECTING | 93667-M11 | CAVITY PLUG, T-11A SHORT |
| 80390-2 | HAIN, 4 LINK | 94520-1NN | RELIEF VALVE |
| 96575 | SHACKLE | 94534-1CXN | LOGIC CARTRIDGE |
| 117076 | COUNTER BALANCE BEAM | 94536-14N | CHECK VALVE |
| 51405-18-S | PIN, COTTER (NOT SHOWN | 94536-230N | CHECK VALVE |
| 121227 | BODY, MAIN - 500 TON | 98402-800D | PILOT-TO-CLOSE CHECK VALVE |
| 109518 | COVER, MAIN BODY | 99353-1AN | DIFFERENTIAL UNLOADING VALVE |
| 121131 | MAIN SHAFT W/LANDING COLLAR | 107028-1ANB | PILOT-TO-OPEN CHECK VALVE |
| 30120556 | BEARING, THRUST - TAPER ROLLER | 107029-175N | RELIEF VALVE, VENTABLE |
| 109521 | (MT) BEARING, ROLLER, CYLINDRICAL, 200 X 360 MM, ROLLER, MAIN LOWER | 107031-1AN / P514000063-1AN | VALVE, RELIEF, PILOT OPERATED, BALANCED PISTON |
| 109591 | SLEEVE, WEAR | 93667-M13 | CAVITY PLUG, T-13A SHORT |
| 117987 | BEARING, ROLLER, SPHERICAL, 80 X 170 | 109858-1AN | REDUCING/RELIEVING VALVE |
| 109539 | RING, SPACER | 111664-1EN | RELIEF VALVE, LOW FLOW |
| 88990-10 | NOZZLE, SPRAY-FLAT PATTERN | 93024-6SAE | TEST FITTING, SAE-6 |
| 94821 | PLUG, MODIFIED | 93018-14 | ORIFICE PLUG, 10-32x.055 |
| 53200-242 | COMPOUND, LOCKING (BLUE) | 110844-18 | ORIFICE PLUG, 1/4 NPT X.071 |
| 51216-24 | PIN, DOWEL | 56531-4-S / 87196-4-S | SAE, J514-4 HEX SOCKET PLUG |
| 88990-9 | NOZZLE, SPRAY-FLAT PATTERN | 87196-8-S | SAE, J514-8 HEX SOCKET PLUG |
| 96648-1 | RING, RETAIN, INT, PHM3I, (TDS9S) | 87196-10-S | SAE, J514-10 HEX SOCKET PLUG |
| 51300-016-B | O RING | 53000-1-C | 1/16 NPT HEX SOCKET PLUG |
| 51300-223-F | O-RING | 56544-4-S | CAP, FEMALE, 37 SEAT |
| 30158573 | GEAR, COMPOUND, HELICAL | 56544-6-S | CAP, FEMALE, 37 SEAT |
| 109522 | BEARING, CYLINDRICAL, ROLLER, COMPOUND UPPER | 56544-12-S | CAP, FEMALE, 37 SEAT |
| 91829-1 | STEM SLEEVE | 50103-16-B | CAPSCREW, HEX SOC HD, # 10-24UNC x 2.00 |
| 109519 | BEARING, TAPER ROLLER | 96079-A | COVER, PLATE D03 |
| 91250-1 | (MT) OIL SEAL (), STD. BORE, TDS | 99838-1 | COVER, SUN CARTRIDGE, SERIES 1 |
| 98291 | SEAL, POLYPAK, 3.875, STD. BORE, TDS | 53200-7471 | PRIMER ACTIVATOR |
| 98290 | LINER, UPPER STEM | 110181 | NAMEPLATE, C' BALANCE MODE |
| 30158574 | GEAR, BULL, HELICAL | 82226 | SEALANT, TAPERED PIPE |
| 50016-28-C5D | SCREW, HEX HEAD CAP | 56519-10-12S | ELBOW |
| 50916-C | WASHER, LOCK - REGULAR | 56519-10-8-S | ELBOW |
| 53000-8-C | PLUG, EXT PIPE | 56519-4-4S | ELBOW |
| 53000-48-C | PLUG, EXT PIPE- COUNTERSUNK HEX | 56519-6-4-S | ELBOW |
| 53000-4-C | PLUG, EXT PIPE - COUNTERSUNK HEX | 56519-4-6-S | ELBOW |
| 30173521 | BEARING ISOLATOR | 128694-6-031 | FLOW CONTROL, -06 MORB / MJIC,.031 ORIFICE |
| 30176112 | RETAINER, BEARING, - UPPER STEM | 56444-8-S | CAP, JIC 1/2'' |
| 51218-18 | LOCKNUT, LOW CARBON STEEL | 56529-4-6-S | CONNECTOR |
| 51217-18 | WASHER, BEARING LOCK, LOW CARBON STEEL | 93018-18 | ORIFICE PLUG, 10-32 X,071 |
| 53000-1-S | PLUG, EXT PIPE - COUNTERSUNK HEX | 56518-6-6-S | -6 FJIC / -6 MJIC, ELBOW |
| 51300-387-F | O-RING, | 50103-10-B | SOCKET CAP SCREW 10-24 X 1 -1/4 |
| 109586-1 | SHIM, 0.002, UPPER BEARING | 124993 | J-BOX (MACHINING) |
| 109586-2 | SHIM, 0.005, UPPER BEARING | 78927-6 | SUPPORT RAIL |
| 109586-3 | SHIM, 0.010, UPPER BEARING | 78927-3 | SUPPORT RAIL |
| 109586-4 | SHIM, 0.015, UPPER BEARING | 123294-3 | TERMINAL ASSEMBLY |
| 109586-5 | SHIM, 0.020, UPPER BEARING | 123294-2 | TERMINAL ASSEMBLY |
| 109566-2 | TUBE, UPPER BEARING LUBE | 30158431 | BREATHER DRAIN |
| 109594 | COVER, BEARING | 123220 | TERMINAL ASSEMBLY (GND. BUS BAR) |
| 109594-1 | COVER, BEARING | 96371 | SCREW, FLAT HEAD (METRIC) |
| 51300-258-B | O RING | 78916 | FIXING NUT AND SCREW (METRIC) |
| 53003-16 | PLUG, MAGNETIC | 50067-040-F-07 | SCREW, CAP-HEX (METRIC) |
| 109593 | RETAINER, BEARING | 50803-N-S | WASHER, FLAT |
| Z6001.9 | LOCK WIRE,.047 | 50649-60 | SCREW |
| 50012-24-C5D | SCREW, HEX HEAD CAP | 30173254-08 | FILLISTER HEAD SCREW, DRILLED |
| 50012-26-C5D | SCREW, HEX HEAD CAP | Z6001.8 | LOCKWIRE, 0.032" |
| 50012-16-C5D | SCREW, HEX HEAD CAP | 117821 | TORQUE WRENCH ASSEMBLY |
| 53000-12-S | PLUG, EXT PIPE - COUNTERSUNK HEX | 119455 | PIN, CRANK |
| 53000-6-C | PLUG, EXT PIPE - COUNTERSUNK HEX 3/8 | 119545 | CRANK ASSEMBLY, LINK TILT |
| 94041-18 | PLUG ORIFICE.071 PHM3I | 125097 | TUBE ASSY, LINK ADAPTER/MANIFOLD |
| 94042-12 | PLUG ORIFICE .047 PHM | 125094 | TUBE ASSY, LINK ADAPTER/MANIFOLD |
| 53002-32-C | PLUG, PIPE - SQUARE HEAD | 119592 | CYLINDER, HYDRAULIC ASSEMBLY |
| 53000-2-S | PLUG, EXT PIPE - COUNTERSUNK HEX | 119387 | PIN, PIPE HANDLER |
| 30154362 | SHIELD, BEARING | 59024P170023 | HOSE ASSY, IBOP CYL, OPEN |
| 30123920 | ASSY, WASHPIPE, 7500 PSI | 59043P170023 | HOSE ASSY, IBOP CYL, CLOSE |
| 117603-1 | PUMP ASSEMBLY, LUBE | 114212 | CLIP, WIRE ROPE, 3/16" |
| 51300-279-B | O-RING | 110042 | SHELL, ACTUATOR, IBOP |
| 50008-12-C5D | SCREW, HEX HEAD CAP | 98898 | CRANK ASSEMBLY, IBOP |
| 50004-6-C5D | SCREW, HEX HEAD CAP | 107052 | LOCK TAB |
| 94269-2 | CLAMP, SINGLE - 1/4" TUBE PHM- 3i | 118947 | BAR, RETAINING |
| 50904-C | WASHER, LOCK - REGULAR | 119123 | LINK |
| 121272-2 | TUBE ASSEMBLY, BREATHER | 56416-32-C | CLEVIS PIN |
| 56506-6-4-S | ELBOW, 90 EXT/37 | 50816-R-C5 | WASHER, FLAT-REGULAR |
| 30171072 | BRACKET, LUBE SWITCH | 118463-2 | MANIFOLD, LINK TILT CYLINDER |
| 121272-1 | TUBE ASSEMBLY, BREATHER | 123685 | BRACKET-MOUNTING, LINK TILT MANIFOLD |
| 110010 | COVER, ACCESS | 51425-20-S | PIN, COTTER |
| 110011 | MT GASKET COVER ACCESS | 120157 | HOSE ASSY, HYDRAULIC CYL.-CRANK ASSY |
| 53912-B | NIPPLE, CLOSE | 120161 | HOSE ASSY, HYDRAULIC CYL.-CRANK ASSY |
| 52212-B | ELBOW, 90 - COMMON, (150LB) | 56416-28-C | CLEVIS PIN |
| 52824-12-B | BUSHING, PIPE REDUCING- COMMON | 114196-1 | WIRE ROPE ASSY |
| 108216-12 | PDM4 BALL VALVE 3/4-14 BRASS | 56519-12-125 | ELBOW, O-RING BOSS/37 |
| 110844-52 | PLUG ORIFICE.250NPT.205 | 120165 | CLAMP, LINK TILT, 500 TON |
| 118217-40R60 | MOTOR ASSY, DRILL AC-575, VAC (RH) (400 HP) | 119122 | CLAMP, LINK TILT, 350 TON |
| 118217-40L60 | MOTOR ASSY, DRILL, AC-575, BAC (LH) (400HP) | 120164 | CLAMP, LINK TILT, 250 TON |
| 30173277 | ROTATING LINK ADAPTER ASSY - 500 TON | 122367 | U-BOLT, 500 TON |
| 110068-2 | ASSEMBLY, RESERVOIR, HYDRAULIC OIL | 119139 | U-BOLT, 350 TON |
| 30151875-504 | HYD DRIVE/ SHOTPIN ASSY ROT LINK ADAPT | 120162 | U-BOLT, 250 TON |
| 30122104 | HEAT EXCHANGER, OIL | 110103-500 | IBOP, UPPER |
| 122249 | BRACKET, HEAT EXCHANGE | 114706-500 | IBOP, LOWER |
| 51300-277-B | O RING | 110103-502 | IBOP, UPPER, H2S (HES TRIM) |
| 109523 | ADAPTER, S-PIPE | 114706-502 | IBOP, LOWER, H2S TRIM |
| 50010-18-C5D | CAPSCREW, HEX HEAD, 5/8-11UNC X 2.25,DH2, GR5 | 112848 | TOOL JOINT LOCK |
| 50910-C | WASHER, LOCK - REGULAR | 117811 | SAVER SUB, NC50 (LONG) |
| 110147-1 | SHIM, RESERVOIR MOUNTING,.002 | 129089-375 | SAVER SUB, 6 5/8, HT55-375 (SHORT / REG) |
| 110147-2 | SHIM, RESERVOIR MOUNTING,.005 | 117812 | SAVER SUB, NC46 (LONG) |
| 110147-3 | SHIM RESERVOIR MOUNTING,.010 | 129089 | SAVER SUB, HT55-400 (SHORT) |
| 110147-4 | SHIM, RESERVOIR MOUNTING,.031 | 118952 | SAVER SUB, NC40 (LONG) |
| 51300-425-B | O-RING | 118953 | SAVER SUB, HT40 (LONG) |
| 105520 | PLAQUE, I.D., TDS-11SA | 118953-1 | SAVER SUB, HT40 (SHORT/REG) |
| 110008 | O-RING,.275X50.5 | 118954 | SAVER SUB, NC38 (LONG) |
| 50012-18-C5D | SCREW, HEX HEAD CAP | 118954-1 | SAVER SUB, NC38 (SHORT/REG) |
| 119977 | LABEL, WARNING, NOV TDS-11S | 118955 | SAVER SUB, NC31 (LONG) |
| 116661-1 | MOUNTING PLATE, MOTOR | 118955-1 | SAVER SUB, NC31 (SHORT) |
| 51300-385-F | O RING | 118956 | SAVER SUB, NC26 (LONG) |
| 118378 | RETAINER, LANDING COLLAR | 118956-1 | SAVER SUB, NC26 (SHORT) |
| 118377 | COLLAR, LANDING (SET) | 123114 | GUIDE, STABBING, 7.00-7.50 OD TOOL JOINT |
| 50008-11-C5D | SCREW, HEX HEAD, 1/2-13 X 1-3/8, GR5 | 118250 | GUIDE, STABBING, 4.00-5.125 OD TOOL JOINT |
| 30184361-520 | GREASE, EXTREME SERVICE, JET-LUBE | 118249 | GUIDE, STABBING, 5.20-6.63 OD TOOL JOINT |
| 30172028-1 | BLOWER MOTOR, U.L., 575 VAC /60 HZ | 118957 | GUIDE, STABBING, NC26 TOOL JOINT |
| 109592-3 | COVER, BLOWER SCROLL BRAKE (LEFT) | 122109 | JAW ASSY, 6.38-7.50 OD TOOL JOINT |
| 30126111-1 | MOUNTING PLATE, BLOWER MOTOR | 80492 | JAW ASSY, 4.00-5.125 OD TOOL JOINT, NC31-NC38 |
| 109563-1 | DUCT | 85786-2 | JAW ASSY, 5.25-6.63 OD TOOL JOINT, NC40 - NC50 |
| 110110-1 | GASKET DUCT BLOWER | 118958 | JAW ASSY, 3.00-4.00 OD TOOL JOINT, NC26 |
| 110116 | MT GASKET MOTOR PLATE | 50108-18-C | CAP SCREW, HEX HD DRILLED |
| 110112-1 | GASKET, BLOWER SCROLL | 117941 | CYLINDER ASSEMBLY, CLAMP |
| 30172172 | CAPSCREW, HEX HEAD | 117822 | PIPE HANDLER, TORQUE ARRESTOR |
| 50506-C | NUT, HEX, SLOTTED | 118511 | MANIFOLD, CLAMP CYLINDER |
| 51401-8-S | PIN, COTTER | 117853 | YOKE, IBOP ACTUATOR |
| 50905-C | WASHER, LOCK - REGULAR | 118510 | CYLINDER ASSEMBLY, IBOP ACTUATOR |
| 50006-10-C5D | CAPSCREW, HEX HEAD, 3/8-16UNC X 1.25, DH | 117869-500 | END CAP, PIPE HANDLER |
| 50008-7-C5D | SCREW, HEX HEAD CAP | 110083 | SPRING |
| 50005-10-C5D | SCREW, HEX HEAD CAP | 50832-N-C | SPACER, SPRING |
| 109592-4 | COVER, BLOWER SCROLL BRAKE (RIGHT) | 110074 | PIN, PIVOT |
| 110001 | COVER, BLOWER | 118336 | PIN, PIVOT |
| 110014 | GASKET BLOWER 7.6X12.5 | 118531 | PIN, PIVOT |
| 115879 | MOUNT CABLE | 71847 | ROLLER |
| 109561-1 | IMPELLER, BLOWER | 118844-12-16 | BEARING, FIBREGLIDE JOURNAL |
| 109563-2 | DUCT | 118844-22-30 | BEARING, FIBREGLIDE JOURNAL |
| 109561-4 | BUSHING, SPLIT TAPER, 28MM | 118844-16-16 | BEARING, FIBREGLIDE JOURNAL |
| 120462 | LABEL, INSTRUCTIONS | 119597-1 | SLEEVE, SPRING |
| 122248 | FASTENING BLOCK | 50822-R- C | FLATWASHER |
| 50006-18-C5D | SCREW, HEX HEAD CAP | 51403-16 | PIN, COTTER |
| 109528 | BRAKE, CALIPER DISC | 50812-R- C | FLATWASHER |
| 109555 | ROTOR, BRAKE | 50005-20- C5D | SCREW, CAP, HEX HD. |
| 109553 | ADAPTER PLATE, BRAKE | 50016-18- C5D | SCREW, CAP, HEX HD. |
| 109557 | WASHER, 300SS | 51016-C | WASHER, LOCK-HEAVY |
| 56529-10-8-S | CONNECTOR, EXT PIPE/37 | 50914-C | WASHER, LOCK-REGULAR |
| 122247-1 | TUBE, HEAT EXCHANGER - 1/2" | 55214-C | NUT, HEX-STANDARD |
| 122247-2 | TUBE, HEAT EXCHANGER - 1/2" | 118021 | GATE |
| 110173 | TUBE ASSEMBLY, BRAKE | 118019 | BODY, CLAMP CYLINDER |
| 110172 | TUBE ASSEMBLY, BRAKE | 11075 | CYLINDER HEAD |
| 117116 | TUBE ASSEMBLY, BRAKE, RIGHT | 12820 | PISTON |
| 50112-20-BD | SCREW, CAP-HEX HEAD (UNC-2A) | 117991 | PIN, HINGE |
| 30171956 | TUBE ASSEMBLY, BRAKE, BOTTOM | 72221 | RING, WIPER |
| 30179069 | BLOWER MOTOR, U.L., 575 VAC /60 HZ | 72219 | SEAL, PISTON |
| M614003119-BSC | ASSY, ENCODER, DIGITAL | 72220 | SEAL, ROD |
| 120114 | MOUNTING BRACKET, ENCODER | 107303-1-8 | FLANGE PROTECTOR, SAE J519 |
| 120116 | SHAFT ADAPTER | 118368 | STABILIZER ASSY, FRONT |
| 120113 | MOUNT ENCODER | 118367 | STABILIZER ASSY, REAR |
| 120112 | MOUNT, SLED | 123313 | RETAINER, HINGE PIN |
| 120119-1 | PULLEY, TIMING | 79179 | SPRING, DIE |
| 120119-2 | PULLEY, TIMING | 110152 | BUSHING, WEAR SST |
| 120115 | SPRING | 117989 | SCREW, HEX-HD, DRILLED SHANK |
| 120117 | BELT, TIMING | 50516C | NUT, HEX-SLOTTED |
| 113246 | BRACKET, PRE- FILL VALVE | 50816-N-5C | WASHER |
| 122943-501 | MOUNT, PLATE, ENCODER | 51403-14-C | PIN, COTTER |
| 122956 | SPACER | 30157288 | TORQUE ARRESTER ASSEMBLY |
| 122953-500 | ARM, TENSIONER, SUPPORT | 30158189 | CRANK ASSEMBLY, LINK TILT |
| 122955 | SPRING, TORSION | 30158164 | PIN, CRANK |
| 122944 | ADAPTER, SHAFT | 30170445 | LINK 1, COLLAPSIBLE |
| 120117-3 | BELT, TIMING, ENCODER | 30170446 | LINK 2, COLLAPSIBLE |
| 122946 | PULLEY, TIMING | 125098 | TUBE ASSEMBLY, LINK ADAPTER / MANIFOLD |
| 120118 | PULLEY, TIMING | 30119592 | CYLINDER, HYDRAULIC ASSEMBLY |
| 122725 | ENCODER, DIGITAL | 30125094 | TUBE ASSEMBLY, LINK ADAPTER / MANIFOLD |
| 122948 | BEARING, BALL, DEEP-GROOVE | 30125097 | TUBE ASSEMBLY, LINK ADAPTER / MANIFOLD |
| 122949 | LABEL, INSTRUCTIONS | 30170045 | PIN, RETAINER, COLLAPSIBLE LINK |
| 122952 | RING, RETAINING | 118868-6 | SHACKLE, ANCHOR |
| 122947 | PULLEY, TENSIONER | 120162 (TBD) | U-BOLT, 250 TON |
| 30177460 | COVER, BLOWER | 123059-2-108 | SLING, ROPE, WIRE |
| M614000689 | PIN, EEx ENCODER TENSIONER SUPPORT ARM | 131085-024 | SLEEVE, NYLON |
| 56003 | GREASE, SEVERE SERVICE | 50006-08-C5D | SCREW, CAP-HEX HEAD |
| M614002976-500 | ASSY, PLATE, MOTOR DUCT /POWER (RIGHT) | 50006-38-C5D | SCREW, CAP HEX HD |
| M614002976-501 | ASSY, PLATE, MOTOR DUCT /POWER (LEFT) | 50412-C | NUT, HEX-HEAVY (3/4-10) |
| 118868-8 | SHACKLE, ANCHOR, 8.5 TON | 50514-C | NUT, HEX-SLOTTED (7/8-9) |
| 110078-FL2 | FERRULE, SAFETY CABLE,.032 | 50814-N-C | WASHER, FLAT |
| 110078-FL18 | FERRULE, SAFETY CABLE,.032 | 50820-N-C | WASHER, FLAT |
| 110078-L36 | CABLE, SAFETY.032 X 36" | 51008-C | WASHER, LOCK-HEAVY (1/2) |
| 110039 | PIN, DOWEL | 51012-C | WASHER, LOCK-HEAVY (3/4) |
| 122954-2 | SPACER | 51402-10-S | PIN, COTTER (1/8 X 1.25) |
| 56506-16-16-S | ELBOW, 90 EXT/37 | 51403-20 | PIN, COTTER |
| M614000690 | BUSHING, SUPPORT ARM | 51435-20-S | PIN, COTTER (5/32 X 2.50) |
| 53300-526 | TIE, CABLE (TY -RAP) | 53300-525 | TIE, CABLE |
| 56502-2-4-S | ELBOW, 45, O-RING BOX /37 | 59024P170021 | HOSE ASSEMBLY, IBOP CYLINDER |
| 56519-12-8-S | ELBOW, O-RING BOSS/37 | 59024P170025 | HOSE ASSEMBLY, IBOP CYLINDER |
| 56525-4-4-S | TEE, SWIVEL INT, 37/37/37 | 59024P230046 | HOSE ASSEMBLY, HYDRAULIC CYLINDER LINK TILT |
| 56526-4-4-S | ELBOW, 90 EXT/37 | 59043P230031 | HOSE ASSEMBLY, HYDRAULIC CYLINDER LINK TILT |
| 56529-4-4-S | CONNECTOR, O-RING BOSS/37' 7/16''-20 X 1/4'' | 59043P230042 | HOSE ASSEMBLY, HYDRAULIC CYLINDER LINK TILT |
| 56531-4-S | PLUG, O-RING BOSS (WITH O-RING) | 59043P23G028 | HOSE ASSEMBLY, HYDRAULIC CYLINDER LINK TILT |
| 56531-8-S | PLUG, O-RING BOSS (WITH O-RING) | 59044P230073 | HOSE ASSEMBLY, CLAMP, PISTON |
| 110078-L12 | CABLE, SAFETY,.031 | 59044P230074 | HOSE ASSEMBLY, CLAMP, ROD |
| 50004-12-C5D | SCREW, HEX HEAD CAP | 51435-16 | PIN, COTTER (5/32 X 2.00) |
| 50004-4-C5D | SCREW, HEX HEAD CAP | 30172154 | PIN, CYLINDER MOUNTING |
| 50004-5-C5D | SCREW, HEX HEAD CAP (also 240) | 103141-7 | CLEVIS |
| 50005-12-C5 | CAPSCREW, HEX HEAD, 5/16-18UNC X 1.50,DH, GR5 | 119416 | CYLINDER, HYDRAULIC |
| 50005-8-CD | CAPSCREW, HEX HEAD, 5/16-18UNC X 1.00,DH, | 114706-501 | VALVE ASSEMBLY |
| 50006-12-C5D | CAPSCREW, HEX HEAD, 3/8-16UNC X 1.50, DH | 114706-503 | VALVE ASSEMBLY |
| 50006-20-C5D | SCREW, HEX HEAD CAP | 114705 | BODY, IBOP |
| 50006-6-C5D | SCREW, HEX HEAD CAP | 89141-7 | CRANK, OPER.-RH |
| 50008-8-C5D | CAPSCREW, HEX HEAD,1/2-13UNC X 1.00,DH2 | 89453-7 | CRANK, OPER.-RH |
| 50010-10-C5D | CAPSCREW, HEX HEAD,5/8-11UNC X 1.25,DH2 | 89141-8 | SEAL, CROWN |
| 50012-12-C5D | SCREW, HEX HEAD CAP | 89453-8 | SEAL, CROWN |
| 50016-12-C5D | SCREW, HEX HEAD CAP | 90441-7 | SLEEVE, CRANK |
| 50016-18-C5D | SCREW, HEX HEAD CAP | 89141-11 | O-RING |
| 50069-22-F08 | SCREW, CAP-HEX HEAD (METRIC) | 89453-11 | O-RING |
| 50103-5-C5D | SCREW, SOCKET HEAD CAP | 89141-12 | BACK-UP RING |
| 50104-8-C | SCREW, SOCKET HEAD CAP | 89453-12 | BACK-UP RING |
| 50168-12-F06 | SCREW, SOCKET HEAD CAP | 30177592 | SET, SEAT/BALL |
| 50804-N-S | WASHER, FLAT NARROW | 30177892 | SET, SEAT/BALL (H2S) |
| 50804-R-S | WASHER, FLAT | 89141-9 | SPRING, WAVE |
| 50806-R-C | WASHER, FLAT, 3/8" | 89453-9 | SPRING, WAVE |
| 50903-C | WASHER, REGULAR-LOCK | 89141-3 | O-RING |
| 51401-6-S | PIN, COTTER | 89141-13 | BACK-UP RING |
| 51433-6-S | PIN, COTTER | 89453-13 | BACK-UP RING |
| 51604-8-S | PIN, ROLL | 90441-9 | O-RING |
| 53301-4-4-SS | SCREW, DRIVE, TYPE U | 89453-16 | O-RING |
| 55504-C | NUT, HEX SLOTTED | 90441-10 | BACK-UP RING |
| 110078-L18 | CABLE, SAFETY.032 X 18'' | 89453-17 | BACK-UP RING |
| 109538 | RING, RETAINING, INTERNAL | 91137-12 | NYLON PLUG |
| 110040-1 | SLEEVE, MAINSHAFT | 89141-1 | RETAINING RING |
| 30155874 | GEAR, BULL, HELICAL | 89453-1 | RETAINING RING (H2S) |
| 109531 | BONNET | 77369-6 | THREAD PROTECTOR-PIN |
| 50112-20-C5D | SCREW, CAP-HEX HEAD (UNC-2A) | 114792 | BODY, IBOP (NAM) |
| 30171957 | TUBE ASSEMBLY, BRAKE, UPPER | 114791 | BODY, IBOP (GLAND POCKET ONLY) |
| M614003119- BSC | ASSY, ENCODER, DIGITAL | 99498-2 | REPAIR KIT - COMPLETE |
| M614000690 | BUSHING, SUPPORT ARM | 99498-1 | REPAIR KIT - SOFT SEALS |
| 118217- | AC MOTOR | 99503-2 | REPAIR KIT - COMPLETE |
| 117939 | PINION GEAR, HELICAL (MACHINING) | 99503-1 | REPAIR KIT - SOFT SEALS |
| 109554 | HUB, BRAKE | 79489-14 | PULLER - SEAT |
| 115040 | PINION INSTALLATION SUPPLIES | 89141-18 | WRENCH - NUT |
| 120994 | LOUVER, DRILL MOTOR | 110103-501 | VALVE ASSY. |
| 30113619 | SCREEN, LOUVER | 110118 | CRANK, OPER-L.H. |
| 120995 | COVER, LOUVER, DRILL MOTOR | 110102 | BODY, IBOP |
| 50808-R-S | WASHER, FLAT, 1/2" | 30183959-75-4-4-B | CONNECTORS AT XXX PLATE |
| 50208-S | NUT, SELF-LOCKING, 1/2" | 124977 | HOUSE TO LOOP JUMPER KIT |
| 50008-12-S | SCREW, HEX, 1/2" X 1 1/2 | 78310-1 | WASHER, BELLEVILLE, 1/2" |
| 30173795-1 | INSTRUCTIONS, HAZARDOUS AREA SAFETY | 30114902 | CRANK, OPER-L.H. |
| 30173795-2 | NAMEPLATE, CERTIFICATION | 65060690 | SLEEVE, CRANK |
| 30173795-3 | INSTRUCTIONS, HAZARDOUS AREA SAFETY | 65060792 | SET, SEAT/BALL |
| 30173795-BSC | NAMEPLATE, CERTIFICATION | 65060794 | SET, SEAT/BALL |
| 78736-14 | CLAMP, SUPPORT, 2.25 ID | 89453-3 | O-RING |
| 53002-02-C | PLUG, PIPE-SQ HD | 65060625 | STABILIZER, SEAL RING |
| 51208-14 | PIN, DOWEL | 96439 | SEAL, U-CUP |
| 53301-04-03-C | SCREW, DRIVE | 96439-1 | SEAL, U-CUP |
| 50005-6-C5D | SCREW, CAP-HEX HEAD DRILLED | 91441-10 | BACK-UP RING |
| 50006-8-C5D | SCREW, CAP-HEX HEAD DRILLED | 91137-10 | PLUG, PRESSURE |
| 117575-1 | ADAPTER PLATE, LUBE PUMP (ALUM ALLOY) | 77369-5 | THREAD PROTECTOR - 6-5/8 |
| 117575 | ADAPTER PLATE, LUBE PUMP (STEEL) | 114859 | REPAIR KIT- COMPLETE |
| 109579 | ADAPTER, MOTOR/PUMP | 114860-2 | REPAIR KIT- COMPLETE |
| 30156326-36S | HYDRAULIC MOTOR LOW-SPEED/ HIGH TORQUE | 114859-1 | REPAIR KIT- SOFT SEALS |
| 109567-H203 | P50 PUMP (GEAR HOUSING) | 114860-1 | REPAIR KIT- SOFT SEALS |
| 109567-G20 | P50 PUMP (GEAR SET) | 98899 | ARM, CRANK (MACHINING) |
| 109567-B | P50 PUMP (ROLLER BEARING) | 98897 | CRANK HOUSING (MACHINING) |
| 109567-E | P50 PUMP (END COVER) | 79824 | CAM FOLLOWER |
| 109567-1 | P50 PUMP (THRUST PLATE) | 99168 | SPACER |
| 109567-S | P50 PUMP (BODY SEAL) | 79825 | ROLLER BEARING |
| 108119-16B | PDM HPU SIGHT GAUGE | 51300-220-B | O-RING |
| 71033 | GASKET, MOTOR | 30158188 | CRANK, ASSEMBLY |
| 53000-16-C | PLUG, SOC HEX, 1 NPT | 118844-16-24 | BUSHING, FIBREGLIDE |
| 56519-16-16-S | ELBOW, O-RING BOSS /37 | 118172-2 | MANIFOLD, LINK TILT CYLINDER (ALUMINUM) |
| 50010-40-C5D | SCREW, CAP-HEX HEAD | 118172-BSC | MANIFOLD, LINK TILT CYLINDER (STEEL) |
| 53418 | PLUG, PLASTIC, PIPE CLOSURE 1-5/16 SAE | 118172-1 | MANIFOLD, LINK TILT CYLINDER (S. S.) |
| 53408 | PLUG, PLASTIC, PIPE CLOSURE | 30173386 | VALVE, COUNTERBALANCE (CBCA-LHN) |
| 108465-24 | PLUG, SHIPPING, SAE O-RING PORT | 93547-1B30N | CHECK VALVE, PILOT TO OPEN (CXCB-XCN) |
| 110067 | RESERVOIR, HYDRAULIC OIL | 94042-36 | ORIFICE, 1/8NPT X 0.142 |
| 111915 | COVER TOP, RESERVOIR | 93018-08 | ORIFICE. #10-32UNF X 0.031 |
| 110191-500 | BLADDER, RESERVOIR (4 GALLONS) | 56529-8-8-S | CONNECTOR, O-RING BOSS/37', ½'' |
| 110191-501 | BLADDER, RESERVOIR (5 GALLONS) | 112809-08 | CAP, SHIPPING, THREADED, -8 |
| 110132 | GASKET | 53200-545 | LOCTITE, HYDRAULIC |
| 51300-038-B | O-RING | 112809-04 | CAP, SHIPPING, THREADED, -4 |
| 107865-16 | STRAINER, SUMP | 30157287 | CLAMP CYLINDER ASSEMBLY |
| 71613 | RESERVOIR BREATHER | 30157226 | TORQUE ARRESTOR, PIPE HANDLER |
| 82570 | ADHESIVE, RUBBER | 125594 | CYLINDER ASSY, HYD, IBOP ACTUATOR |
| 30113165 | VALVE, RELIEF-POPPET | 30157225 | YOKE, IBOP ACTUATOR |
| 110013 | BRACKET | 30157308 | SPRING |
| 56506-8-6-S | ELBOW, 90 EXT/37 | 30157294 | BOTTOM PLATE |
| 56506-12-12-S | ELBOW, 90 EXT/37 | 121979 | TRUNNION BUSHING, CYL MOUNT |
| 56506-16-16-S | ELBOW, 90 EXT/37 | 30157292 | POST, SPRING |
| 53406 | CAP, PLASTIC PIPE CLOSURE 9/16 SAE | 30158766-1 | PIN, PIVOT, YOKE |
| 53415 | CAP, PLASTIC PIPE 1-1/16 SAE | 30157318-1 | SPACER, SPRING |
| 50908-S | WASHER, LOCK-REGULAR, SS | 30157318-2 | SPACER, SPRING |
| 50008-12-SD | SCREW, CAP-HEX HEAD | 30157318-3 | SPACER, SPRING |
| 50904-S | WASHER, LOCK-REGULAR | 118844-16-8 | BEARING, SELF LUB, 1.00 ID X.50 LG |
| 50004-5-SD | SCREW, CAP-HEX HEAD (UNC-2A) | 118844-16-12 | BEARING, SELF LUB, 1.00 ID X.75 LG |
| 50004-10-SD | SCREW, CAP-HEX HEAD (UNC-2A) | M614004374-4-B | NAMEPLATE, PIPE HANDLER |
| 30177314-500 | STEM | 53301-4-3 | SCREW, DRIVE - TYPE U |
| 30177594-500 | STEM | 118844-22-22 | BEARING, SELF LUB, 1.375 ID X.50 |
| 30173159 | ROTATING LINK ADAPTER | 30172179 | BAR, SAFETY, CLAMP CYLINDER |
| 30173157 | GEAR, ROTATING LINK ADAPTER (500 TON) | 30172825 | PIN, PIVOT |
| 30119143 | RING, GLYD, 11.50 ROTARY | 30172060 | NUT, HEX, MODIFIED, PH60/85 |
| 30119319 | RING GLYD 11.00 ROTARY | 50216-C | NUT, HEX HD, SLOTTED 1.00-8 |
| 30119357 | RING THRUST | 51604-6-C | PIN, ROLL, 0.250 X.75 LG |
| 30173156 | PISTON RING | 30114259 | PIN, SAFETY |
| 30177233 | PISTON RING | 30157297 | HANGER, CLAMP ASSEMBLY |
| 30114594 | BOLTS, CATCH LINK | 30157426 | SCREW, DRILLED SHANK |
| 124029 | SHAFT, PIVOT-LOCKING PIN (RLA 500 TON) | 50516-S | NUT, HEX-SLOTTED |
| 119547 | SEAL WIPER | 51435-16-S | PIN, COTTER |
| 119359 | RETAINER OIL SEAL | 30184320-502 | BUSHING |
| 119358 | BUSHING, TURCITE | 120557 | CYLINDER, DOUBLE ROD |
| 119124 | STOP (RLA 500 TON) | 120557-500 | CYLINDER, DOUBLE ROD WITH LIP SEALS |
| 118375 | GLYD RING ROTARY 10.000 | 120557-LT | CYLINDER, DOUBLE ROD WITH LIP SEALS |
| 115176 | BUSHING SLEEVE 1.0X1.25 | 120557-501 | CYLINDER, DOUBLE ROD WITH LIP SEALS |
| 77039 | SEAL | 103141-25 | KNUCKLE, ROD MALE |
| 112754-116 | BEARING SINTERED BRONZE FLANGED | 103141-8 | CLEVIS, ROD FEMALE |
| 112754-130 | BEARING SINTERED BRONZE FLANGED | 124902 | GATE |
| 30117775-2 | RING RETAINER EXTERNAL | 30157221 | BODY, CLAMP CYLINDER |
| 112809 | CAP | 11085 | RING, CYLINDER HEAD |
| 51300-273-B | O-RING | 30178847 | PIN, HINGE |
| 51300-381-B | O RING | 30124898 | STABILIZER, FRONT |
| 53002-12-S | CONNECTOR, O-RING BOSS/ 37 | 30158690 | LINER, STABILIZER |
| 53200-271 | COMPOUND, LOCKING (RED) | 30125052 | JAW ASSY, NC50 - 5 1/2 FH (06.25-7.50) |
| 53250-5 | RELIEF VALVE | M614004317-500 | PLATE, RETAINER, PIN, HINGE |
| 56529-8-4-S | CONNECTOR, O-RING BOSS/ 37 | M614004316 | BOLT, STAND-OFF |
| 56529-8-6-S | CONNECTOR, O-RING BOSS/ 37 | 30178859 | RETAINER, HINGE PIN |
| 51405-24 | PIN, COTTER | 50005-20-C5D | SCREW, HEX HD |
| 51437-20-S | PIN, COTTER | 50816-N-C | WASHER |
| 50020-24-C5D | SCREW, CAP-HEX HD | 51403-14-S | PIN, COTTER |
| 50320-C | NUT, HEX-JAM | 51402-8-S | PIN, COTTER |
| 50520-C | NUT, HEX, SLOTTED | 30177109-04 | MODIFIED, SHOULDER BOLT |
| 51216-12 | DOWEL 1.0 X 1.5 | 50108-14-C | SCREW, CAP, SOC HEAD |
| 51222-05-12 | PIN. SPIRAL (RLA 500 TON) | 56405-20-C | PIN, CLEVIS |
| 50012-20-C8D | SCREW, CAP-HEX HD | 30178854-05 | SPLIT RING, SS |
| 30151953 | HOUSING, HYD DRIVE/SHOT PIN | 50508-C | NUT, HEX-SLOTTED |
| 30151953-LT | HOUSING, HYD DRIVE/SHOT PIN | 125059 | GUIDE, STABBING, GATE |
| 30156250 | GEAR, COMPOUND, 40X25 | 125057 | GUIDE, STABBING, CLAMP CYL. |
| 30151960 | SHAFT, COMPOUND GEAR PH-100 | 76443 | SPRING |
| 30151960-LT | SHAFT, COMPOUND GEAR PH-100 | 76442 | GUIDE, ARM |
| 30173958 | SHOT PIN | 76445 | RETAINER |
| 30173958-LT | SHOT PIN | 50008-13-C5D | CAP SCREW, HEX DRILLED HEAD |
| 110061-326 | SEAL PISTON | 50810-N-S | WASHER, FLAT, NARROW |
| 30151951 | SLEEVE, SHOT PIN | 51402-8-S | PIN, COTTER |
| 110056 | ROD SEAL ASSEMBLY,1.5 BORE | 30172178 | PIN, GUIDE ARM |
| 51300-226-B | O-RING | 124925 | JAW |
| 30151961 | FLANGE, BUSHING, SHOT PIN, PH-100 | 16401-2 | DIE, TONG |
| 30151954 | BEARING, RADIAL LIGHT | 124935 | RETAINER, DIE |
| 30156256 | GEAR, DRIVE | 122112 | BOLT, RETAINER |
| 53500-225 | RING, RETAINING, INTERNAL | 112489-2 | MANIFOLD, CLAMP CYLINDER |
| 30151955 | RETAINER, BEARING, PH-100 | 94537-130N | CARTRIDGE, CHECK (PILOT TO CLOSE) (CODA-XCN) |
| 30158011 | HYD MOTOR, MODIFIED LOW SPEED HIGH TORQUE | 56557-8-8-S | ELBOW, 45* O-RING BOSS/37' |
| 30151959 | RETAINER, PIN | 51300-210-B | O - RING, SIZE -210 |
| 94522-IEN | CARTRIDGE VALVE RELIEF TDS9S | 80098 | SPACER SUB |
| 56555-6-6-S | VARCO BJ CONNECTOR | 77408 | WRENCH,.875 HEX |
| 93024-6JIC | FITTING, TEST POINT, 1/4 NPT | 125051 | JAW ASSEMBLY, 04.75-06.00 O.D. TOOL JOINT |
| 50005-26-C | CAPSCREW | 125052 | JAW ASSEMBLY, 06.25-07.50 O.D. TOOL JOINT |
| 30152190 | MANIFOLD ASSY (NO SOLENOID VALVE) | 125053 | JAW ASSEMBLY, 0.70-08.62 O.D. TOOL JOINT |
| 30152190-1 | MANIFOLD ASSY (24 VDC Eexd VALVE) | 30173233 | JAW ASSEMBLY, 03.50-04.31 O.D. TOOL JOINT |
| 30152190-2 | MANIFOLD ASSY (24 VDC UL VALVE) | 125157 | STABBING GUIDE ASSEMBLY, 04.75-06.00 O.D. TOOL JOINT |
| 30152190-3 | MANIFOLD ASSY (COVER PLATE) (NO SOLENOID VALVE) | 125158 | STABBING GUIDE ASSEMBLY, 06.25-07.50 O.D. TOOL JOINT |
| 30152190-4 | MANIFOLD ASSY (COVER PLATE) (NO SOLENOID VALVE) | 125159 | STABBING GUIDE ASSEMBLY, 07.50-08.63 O.D. TOOL JOINT |
| 30152190-SS | MANIFOLD ASSY (STAINLESS) | 30173442 | STABBING GUIDE ASSEMBLY, 03.50-04.31 O.D. TOOL JOINT |
| 30114855-7500 | S-PIPE, LH, WELDMENT, 7500 PSI (OUTSIDE GUARD) | 30157433 | SAVER SUB, 6 5/8 F.H (PH75) |
| 117063-7500 | S-PIPE, RH, WELDMENT, 7500 PSI (OUTSIDE GUARD) | 123221-1 | SAVER SUB, 6 5/8 REG X 5 1/2 F.H. |
| 116376 | S-PIPE, WELDMENT (HERCULES) | 76666-2 | SAVER SUB, 6 5/8 REG X NC50 |
| 30114855 | S-PIPE, LH WELDMENT, 5000 PSI (OUTSIDE GUARD) | 78656-1 | SAVER SUB, 6 5/8 REG/SHORT X NC46 |
| 117063 | S-PIPE, RH WELDMENT, 5000 PSI (OUTSIDE GUARD) | 118952-1 | SAVER SUB, 6 5/8 REG/SHORT X NC40 |
| 114840 | MOUNT, S-PIPE LH (OUTSIDE GUARD) | 30157411 | SAVER SUB, 6 5/8 REG X XT39 |
| 117061 | MOUNT, S-PIPE RH (OUTSIDE GUARD) | 30172182 | SAVER SUB, 6 5/8 REG X XT57 |
| 108870-1 | MOUNT, S-PIPE-BASE | 30173142 | SAVER SUB, 6 5/8 REG X PH-6, 3 1/2 OD |
| 108870-2 | MOUNT, S-PIPE-TOP | 30179163 | SAVER SUB, 6 5/8 REG X VT40(TAURUS), 4 7/8 OD |
| 92426 | RUBBER, S-PIPE | 117185-500 | SAVER SUB, 6 5/8 REG X HT38 |
| 30123290 | ASSEMBLY, WASH PIPE | M614004201 | SAVER SUB, API 6-5/8 REG RH X 3-1/2 XT31 |
| M614002641 | ASSY, PLUG, 3" FIG 1002 | M614004240 | SAVER SUB, API 6-5/8 REG RH X 2-7/8 HT-PAC |
| 91923 | SEAL RING, 3" FIG 1002 | 30125012 | LINER, STABILIZER |
| 78002 | CLAMP, SERVICE LOOP BRACKET | 85705 | CROSSOVER SUB, 6 5/8 REG X 6 5/8 F.H |
| 81158 | WING NUT, 4" FIG 1003 | 79410-4 | CROSSOVER SUB, 6 5/8 REG X 5 1/2 F.H. |
| 114833 | SEAL RING, 4" FIG 1002 | 79410-3 | CROSSOVER SUB, 6 5/8 REG X NC50 |
| 107714 | MOUNT, COMPOSITE CABLE | 115595 | CROSSOVER SUB, 6 5/8 REG X NC46 |
| 56541-32 | KIT, FLANGE | 120822 | CROSSOVER SUB, 6 5/8 REG X NC40 |
| 116411 | BRACKET, SERVICE LOOP/S-PIPE | 114542-600 | CROSSOVER SUB, 6 5/8 REG X HT40 |
| 50008-16-C5D | SCREW, CAP-HEX HEAD | 110852 | CROSSOVER SUB, 6 5/8 REG X NC38 |
| 50012-13-C5D | SCREW, CAP-HEX HEAD | 129090-375 | CROSSOVER SUB, 6 5/8 REG X HT55 |
| 50012-30-C5D | SCREW, CAP-HEX HEAD | 30157412 | CROSSOVER SUB, 6-5/8 REG X XT39 |
| 50008-30-C5D | SCREW, CAP-HEX HEAD | 30172183 | CROSSOVER SUB, 6-5/8 REG X XT57 |
| 114093-75 | ELBOW, S-PIPE, 5" FIG 1002, FEMALE | 30173144 | CROSSOVER SUB, 6-5/8 REG X PH-6, 3 1/2 OD |
| 117679 | MALE SUB, 4" FIG 1002, FEMALE | 30179164 | CROSSOVER SUB, 6-5/8 REG X VT40(TAURUS), 4 7/8 OD |
| 84617 | ELBOW, S-PIPE, 4" FIG 1002, FEMALE | M614001949 | CROSSOVER SUB, 6-5/8 REG X HT38 |
| 81153 | ELBOW, S-PIPE, 4" API LPT END, FEMALE | M614004258 | CROSSOVER SUB, API 6-5/8 REG RH X 3-1/2 XT31 |
| 30123563 | BOX, PACKING ASSY, 3" WASH PIPE | M614004259 | CROSSOVER SUB, API 6-5/8 REG RH X 2-7/8 HT-Pac |
| 123284 | NUT, 3" WASH PIPE | M614004365 | STABBING GUIDE ASSEMBLY, 03.12-04.12 O.D. TOOL JOINT |
| 30123289 | PIPE, WASH-3" BORE | M614004362 | JAW ASSEMBLY, 03.12-04.12 O.D. TOOL JOINT |
| 30123289-C88 | PIPE, WASH-3" BORE, C88 | 50108-20-C | SCREW, SOCKET HEAD CAP-.500-13 UNC X 2.50 LG |
| 30123288 | RING, HOLDING, 3" WASH PIPE | 50108-16-C | SCREW, SOCKET HEAD CAP-.500-13 UNC X 2.00 LG |
| 30123562 | RING, SNAP | 50108-12-C | SCREW, SOCKET HEAD CAP-.500-13 UNC X 1.50 LG |
| 30123564 | SCREW, SOCKET HD-DOG NOSE | 50108-24-C | SCREW, SOCKET HEAD CAP-.500-13 UNC X 3.00 LG |
| 30123287 | SPACER, LOWER, 3" WASH PIPE | 50108-28-C | SCREW, SOCKET HEAD CAP-.500-13 UNC X 3.50 LG |
| 30123286 | SPACER, MIDDLE, 3" WASH PIPE | 51108-C | WASHER, LOCK-HIGH COLLAR 0.500 NOM |
| 123285 | SPACER, UPPER, 3" WASH PIPE | 16532 | KEY |
| 30150084 | WRENCH, WASHPIPE | 121732 | WELDMENT, ENCLOSURE |
| 123292-2 | PACKING SEAL KIT (5 PER SET) | 116551 | RHEOSTAT ASSY, THROTTLE |
| 123292-3 | PACKING SEAL KIT (5 PER SET) | 121012-1 | GASKET, ENCLOSURE |
| 51300-348-F | O-RING | 122627-46 | REMOTE 24 DI/800, 24VDC |
| 86268 | GREASE, GE-MTR (SHELL/EXXON) | 122627-45 | REMOTE 4 ANALOG INPUT |
| 53219-1 | FITTING, GREASE- STRAIGHT EXT. | 122627-47 | REMOTE 4 ANALOG OUTPUT |
| 56005-1 | DELETED | 81736-2 | POTENTIOMETER, 10 K |
| 3013289-TC | DELETED | 30087708-46 | POTENTIOMETER OPERATOR |
| 80-506-100 | SYSTEM, BLAK JAK WASHPIPE CARTRIDGE WITH HANGER AND TOOLS, 5000 PSI | 122627-58 | REMOTE I/O BASE, DIGITAL |
| 80-506-100S | SPARE CARTRIDGE, BLAK JAK WASHPIPE P-TYPE | 122627-57 | REMOTE I/O BASE, ANALOG |
| 61938641 | WASHPIPE, WITH SNAP RING P-TYPE | 122627-34 | BUS CONNECTOR (PROFIBUS) |
| 703429G3U | SET, WASHPIPE PACKING 5 RINGS WITH 2 THICK O-RINGS | 96290 | REG. MODULE, +24VDC/+5VDC |
| 80506100K | STANDARD REBUILD KIT (INCLUDES ITEM 9,10,12,14,18,19) | 96218-3 | METER, RPM, 0-10VDC (0-250 RPM) |
| 80506100KS | SEAL REBUILD KIT (INCLUDES ITEM9,10,12) | 30087708-17 | PUSHBUTTON, ILLUMINATED, AMBER, W/GUARD |
| 80506100KA | COMPLETE REBUILD KIT (INCLUDES ITEM 8,9,10,14,16,18,19,20) | 30087708-67 | PUSHBUTTON, E-STOP. MUSHROOM |
| 80-50-6017 | WASHPIPE HOLDING RING | 30087708-33 | SWITCH, SEL-3 POS, SPRING RTN FROM RIGHT |
| 7817600348 | O-RING THICK | 30087708-30 | SWITCH, SEL-3 POS, SPRING RTN TO CENTER |
| 99609245 | O-RING THIN | 30087708-02 | SWITCH, PUSHBUTTON |
| 80-50-6015 | UPPER WASHPIPE PACKING ADAPTER RING THREADED | 30087708-40 | INDICATING LIGHT, AMBER |
| 612984 | PACKING RING | 30087708-38 | INDICATING LIGHT, RED |
| 80-506-014 | UPPER WASHPIPE NUT | 30087708-44 | INDICATING LIGHT, 2 WATT |
| 80-506-001 | HOUSING, LOWER GLAND | 56621-18-8 | WIRE, STRANDED, HOOK-UP |
| 661010020 | GREASE FITTING | 87975 | CABLE, 2 TWISTED PAIR |
| 80-506-010 | NUT, LOWER GLAND | 56610-01 | TERMINAL, WIRE-SPADE |
| 80-506-004 | UPPER WASHPIPE PACKING SPACER RING | 78725-02 | FERRULE, 20 AWG |
| 80-506-005 | MIDDLE WASHPIPE PACKING SPACER RING | 78725-03 | FERRULE, 18 AWG |
| 80-506-006 | LOWER WASHPIPE PACKING ADAPTER RING THREADED | 78725-05 | FERRULE, 12 AWG |
| 80-506-037 | HANGER ASSY (INCLUDES ONE SPANNER BAR W/ LANYARD) | 122443-9-H | CABLE, PIGTAIL, 5 TSP, CONNECTORIZED |
| 80-506-020 | SPANNER BAR | 125041 | H-RAIL, 33 INCH |
| 80-506-031 | SPANNER TOOL | 85038-UL-2.5 | TERMINAL BLOCK |
| 80-506-027 | ASSEMBLY FIXTURE | 85039 | ENDPLATE, TERMINAL |
| 120887 | GUARD, MOTOR HOUSING | 90153 | END CLAMP |
| 30171318-500 | WELDMENT SUPPORT, UPPER GUARD/WEDGE | 85145-6-001 | MARKERS, HORIZONTAL (#1-10) |
| 30171318-501 | WELDMENT SUPPORT, UPPER GUARD/WEDGE | 85145-6-011 | MARKERS, HORIZONTAL (#11-20) |
| 117089 | SUPPORT, LOWER | 85145-6-021 | MARKERS, HORIZONTAL (#21-30) |
| 117089-395 | SUPPORT, LOWER | 50649-68 | SCREW, MACHINE, PAN HD. 10-32 |
| 30177155 | SCREW, CAP-HEX HD | 50649-61 | SCREW, MACHINE, PAN HD. 10-32 |
| 121483 | LABEL, LINK INSTALLATION | 50803-R-S | WASHER, FLAT NO. 10 |
| 51402-12 | COTTER PIN (1/8 NOM) | 50903-S | WASHER, LOCK, NO. 10 |
| 110564-1SEP | ACCUMULATOR, HYDRO-PNEUMATIC 2" | 50202-S | NUT, HEX, 8-32 |
| 110564-1 | ACCUMULATOR, HYDRO-PNEUMATIC 2" | 50802-R-S | WASHER, FLAT, NO. 8 |
| 110563-1CE | ACCUMULATOR, HYDRO-PNEUMATIC 4" | 50902-S | WASHER, LOCK, NO. 8 |
| 110563-1 | ACCUMULATOR, HYDRO-PNEUMATIC 4" | 50604-6-S | SCREW, MACHINE, FLAT HD, 1/4-20 |
| 110562-1CE | ACCUMULATOR, HYDRO-PNEUMATIC 6" | 50204B | NUT, HEX, 1/4-20 |
| 110562-1 | ACCUMULATOR, HYDRO-PNEUMATIC 6" | 50202-B | NUT, HEX, 8-32 |
| 30115918 | ADAPTER, PUMP INLET/DRAIN | 96206-3 | LABEL, NFPA 496 Z PURGE |
| 55913-12 | CAP, DUST-PLASTIC (QD) | 110869 | RIVET, SEALING, CLOSED END |
| 94270-6 | CLAMP, DBL 1/2" TUBE | 81778 | SWITCH, DIFFERENTIAL PRESSURE |
| 94270-4 | CLAMP, DBL 3/8" TUBE | 88493 | ELBOW, FEMALE, 1/4 X 1/8 |
| 56501-12-12-S | CONNECTOR EXT PIPE/37 | 88491 | ELBOW, MALE, 1/4 X 1/8 |
| 56501-4-4-S | CONNECTOR, EXT PIPE/37 | 52002-12-B | NIPPLE, PIPE, 1/8 NPT X 1.5 LNG |
| 56524-8-8-S | CONNECTOR, EXT PIPE/37 | 80430 | TUBING, 1/4 |
| 56529-16-16S | CONNECTOR, O-RING BOSS/37 | 53227 | TAPE |
| 56529-6-6-S | CONNECTOR, O-RING BOSS/37 | 78910-BSC | RTV, 108, CLEAR |
| 56551-16-12S | CONNECTOR, O-RING BOSS/INT PIPE | 53200-454 | COMPOUND, LOCKING, CLEAR |
| 940315-20 | CONNECTOR, STAUFF #TCM20 | 88650 | GREASE, LITHIUM BASED |
| 56502-16-12S | ELBOW, 45 EXT PIPE/37 | 96219-10 | METER, TORQUE, TDS-10 (0-40K FT LB) |
| 56702-12-12S | ELBOW, 90 EXT PIPE | 96219-11 | METER, TORQUE, TDS-9S/11S (0-60K FT LB) |
| 56506-16-16S | ELBOW, 90 EXT PIPE/37 | 30121239-BSC | NAMEPLATE, VDC, STANDARD |
| 56506-4-4-S | ELBOW, 90 EXT PIPE/37 | 30121239-2 | NAMEPLATE, VDC, VERTICALLY MOUNTED |
Q1.How can I get samples?
We can provide some free samples (total value under 15 US dollars) if you have a DHL, TNT, UPS or FedEXaccount or other courier freight collectable account and agree to pay the courier freight.
If the total value of samples is more than 15 US dollars, we'd like to ask you to pay for the samples and courier freight. We will send the samples to you after receipt of your payment.
If you don't have courier account, you can send your courier to collect samples from our company; or send us the samples charge together with the courier cost by T/T.
Q2.How much the courier freight will be for the samples?
Courier freight depends on the quantity, weight and carton size and your area. you can use your courier company.
Q3.How can I get your Quotation Sheet?
Please send us your inquiry , drawings and your specifications by email or fax , we will offer you our price list, offer sheet and order information in one working day.
Q4.How to place an order?
Please send us your purchase order by email or fax. Or you can ask us to send you a Proforma Invoice for your order. We need to know the following information for your order:
* Shipping information - company name, street address, phone number, fax number, destination airport or sea port, transportation method (by courier, by air or by ocean container)
* Product information - model numbers, quantity, unit price and price term we reach to
* Delivery time required
* Payment terms
* Forwarder's contact details if necessary
Q5: What products can we purchase from Rosenwell?
A5: Our main products include mud pump parts, pistons, API 6A gate valves, handling tools, drill strings, API 16A well control equipment, and more, catering to the oil and gas industry with a wide range of equipment and accessories.
Q6: Why should we choose Rosenwell over other suppliers?
A6: We've supplied products to well-known oil service companies worldwide, including CNPC and CNOOC. We guarantee product quality, on-time delivery, and offer personalized services, resulting in high customer satisfaction.
Q7: What are your payment methods and trade terms?
A7: We support various payment methods, including T/T, L/C, D/P, D/A, credit cards, PayPal, Western Union, MoneyGram, cash payments, and Escrow. Additionally, we offer various shipping terms such as FOB, CIF, CFR, EXW, CIP, DDP, FCA, and DDU, ensuring flexible and efficient delivery solutions.
){kind=link}