High Performance Downhole Oilfield Sucker Rod

• Customization: Available
• After-sales Service: on-Line Guided Installation
• Warranty: 12 Months
• Model NO.: sucker rod
• Manufacturing Process: Hot Rolled, Forged, Heat Treated
• Surface Treatment: Polished, Heat-Treated, Coated
• Operation Pressure: 2000-5000 Psi or Customized
• Material: Alloy
• Connection Type: Threaded Connection
• Tensile Strength: ≥800MPa
• Standard: Ap-I Spec 11b
• Application: Oilfield Drilling & Pumping
• Hardness Grade: HRC 20-25 or Customized
• Diameter Tolerance: ±0.5mm
• Product Grade: D, K, Kd, Hl, Hy / Grades D, Hy
• Surface Coating: Nickel Plated, Painted, or Anti-Corrosion Coated
• Impact Toughness: ≥60j
• Yield Strength: ≥600MPa
• Transport Package: Wooden Cases, Steel Frames or Bundled Packing
• Specification: 5/8" 3/4" 7/8" 1"
• Trademark: ROSENWELL
• Origin: Shandong
• HS Code: 84139000
• Production Capacity: 100000/Year

Product Description

 

Sucker Rod

Sucker Rods, Drive Rods and P-ony Rods are manufactured from micro-alloyed, modified special quality hot rolled carbon or alloy steel. Bar and sucker rod dimensions and tolerances conform to AP-I Spec 11B, latest edition, and AISI Steel Products Manual. It is used to connect the pumping unit on the ground and PCP. Sucker rod is an important part in the oil production system. Different grades of sucker rod has features of high strength, non-corrosive medium, good tensile and long service life.

Sucker Rods, Drive Rods and P-ony Rods are manufactured from micro-alloyed, modified special quality hot rolled carbon or alloy steel. Bar and sucker rod dimensions and tolerances conform to AP-I Spec 11B, latest edition, and AISI Steel Products Manual.

Sucker rods are available in 5/8" (15.88 mm), 3/4" (19.05 mm), 7/8" (22.23 mm), 1" (25.40 mm) and 1 1/8" (28.58 mm).

Drive Rods for Progressing Cavity Pump application are available in 1" (25.40 mm), 1 1/4" (31.75 mm), and 1 1/2" (38.10 mm) body diameter and in 25' (7.62 m) lengths.

 

 

Dimension table :
Sucker Rod
Sucker Rod Nominal Value (mm)	Sucker Rod Nominal Value (in)	Rod Body diameter  (mm)	Pin Size (in)	Pin Size (mm)	Shoulder OD (in)	Shoulder OD (mm)	Wrench Square width (mm /in)	Wrench Square Length (mm /in)	AP-I sucker rod length with coupling (mm/ft)
16	5/8	15.88	15/16	23.81	1.25	31.8	22.2(0.875)	31.8(1.250)	609.2    (2')
									1219    (4')
									1828    (6')
19	3/4	19.05	2001/1/16	26.99	1.5	38.1	25.4(1.000)		2438    (8')
22	7/8	22.23	2001/3/16	30.16	1.625	41.3	25.4(1.000)		3048   (10')
25	1	25.4	2001/3/8	34.93	2	50.8	33.3(1.313)		7620    (25')
29	2001/1/8	28.58	2001/9/16	39.69	2.25	57.2	38.1(1.500)		9144    (30')

 

Mechannical Propterty
Grade	Tensile strength MPa	Yield strength MPa	Percentage elongation %	Contraction percentage of area %
C	620 - 795	≥ 415	≥ 13	≥ 50	Scuker rod
K	620 - 795	≥ 415	≥ 13	≥ 60	Scuker rod
D	795 - 965	≥ 590	≥ 10	≥ 50	Scuker rod & Drive Rod
KD	795 - 965	≥ 590	≥ 10	≥ 50	Scuker rod & Drive Rod
HL	965 - 1195	≥ 795	≥ 10	≥ 45	Scuker rod & Drive Rod
HY	965 - 1195	N/M	N/M	N/M	Scuker rod & Drive Rod

 

 

Drive Rod
Sucker Rod Nominal Value (mm)	Sucker Rod Nominal Value	Rod Body diameter	Rod End Size	Rod End Size	Length of Finished Product (mm)	Length of Finished Product (ft)
	(in)	(mm)	(in)	(mm)
25	1	25.4	7/8	22.23	1000	2
					2000	4
29	2001/1/8	28.58	1	25.4	3000	6
32	2001/1/4	31.75	1	25.4	7620	25
38	2001/1/2	38.1	2001/1/8	28.58	8000	26

 

Parameter of our sucker rod
SIZE	ROD D.	THREAD D.	LENGTH	Outside D. of Pin Shoulder	Length of Pin	Length of Wrench Square	Width of Wrench Square
(in)	(in)	(in)	(ft)	(mm)	(mm)	(mm)	(mm)
5/8''	5/8''	15/16	2	31.75	31.75	≥31.75	22.23
3/4''	3/4''	2001/1/16	8	38.1	36.51	≥31.75	25.4
7/8''	7/8''	2001/3/16	10	41.28	41.28	≥31.75	25.4
1''	1''	2001/3/8	25	50.8	47.63	≥38.10	33.34
1-1/8''	1-1/8''	2001/9/16	30	57.15	53.98	≥41.28	38.1

Technical Parameters of popular size (Polished Rod)
Product	D, H, K, KD, HY, HL (Polished Rod)
Diameter mm (inch)	16 (5/8)	19 (3/4)	22 (7/8)	25 (1)	28 (1 1/8)
Length ± 51mm	7620 (25')	7620(25')	7620 (25')	7620 (25')	7620 (25')
	8000 (26')	8000 (26')	8000 (26')	8000 (26')	8000 (26')
	9140 (30')	9140 (30')	9140 (30')	9140 (30')	9140 (30')

 

Sucker rod is commonly used equipment in oil exploitation, which is made by many processes such as inspection, straightening and forging. The rod is located between the rod and the pump and is used to transfer power. The rod is made of high quality carbon and alloy steel in accordance with AP-I Spec 11B standards.Sucker rod has ordinary sucker rod, high strength anticorrosive sucker rod, taper thread sucker rod, plug-in sucker rod, and heavy sucker rod

Sort the rod
There are various types:
Regular rod (Class C rod. D Class A rod, Class K rod. K DStage rod)
High strength rod:
(H class rod, HY class rod. HL Class rod. KHL Stage rod)

 

Performance of the sucker rod
Grade	Tensile Strength	Yield Strength	Percentage Elongation	Contraction Percentage of Area
	Rel(Mpa)	Rm(Mpa)	A(%)	Z(%)
C	620-795	≥415	≥13	≥50
K	620-795	≥415	≥13	≥60
D	795-965	≥590	≥10	≥50
KD	795-965	≥590	≥10	≥50
HL	965-1195	≥795	≥10	≥45
HY	965-1195	-----	-----	-----

 

 

Chemical Composition of Common Sucker Rod Material
AISI	C	Si	Mn	P	S	Cr	Ni	Mo	V	Cu	Al
1541	0.36-0.45	0.15-0.35	1.35-1.65	≤0.04	≤0.04	≤0.3	≤0.35	≤0.06	0.04-0.09	≤0.35	≤0.035
4120	0.17-0.24	0.17-0.37	0.4-0.7	≤0.025	≤0.025	0.8-1.1	≤0.3	0.15-0.25	/	≤0.2	/
4130	0.26-0.33	0.17-0.37	0.4-0.7	≤0.025	≤0.025	0.8-1.1	≤0.3	0.15-0.25	/	≤0.2	/
4138	0.37-0.45	0.17-0.37	0.9-1.2	≤0.025	≤0.025	0.9-1.2	≤0.3	0.2-0.3	/	≤0.2	/
4138M	0.37-0.45	0.17-0.37	0.9-1.2	≤0.025	≤0.025	0.9-1.2	≤0.3	0.2-0.3	0.04-0.09	≤0.2	/
4140	0.38-0.45	0.17-0.37	0.5-0.8	≤0.025	≤0.025	0.9-1.2	≤0.3	0.15-0.25	0.04-0.09	≤0.2	/
4142	0.38-0.45	0.17-0.37	0.5-0.8	≤0.025	≤0.025	0.9-1.2	≤0.3	0.15-0.25	0.04-0.09	≤0.2	/
3130	0.22-0.29	0.15-0.35	0.71-1.0	≤0.025	≤0.025	0.42-0.65	0.72-1.0	0.01-0.06	/	≤0.2	/
4320	0.18-0.42	0.15-0.35	0.8-1.0	≤0.025	≤0.025	0.7-0.9	1.15-1.5	0.2-0.3	0.04-0.09	≤0.35	≤0.035
4330	0.3-0.35	0.15-0.35	0.8-1.1	≤0.025	≤0.025	0.8-1.1	1.65-2.0	0.2-0.3	0.05-0.10	≤0.2	/
4621	0.18-0.23	0.17-0.37	0.7-0.9	≤0.025	≤0.025	≤0.35	1.65-2.0	0.2-0.3	/	≤0.2	/
4720	0.19-0.23	0.15-0.35	0.85-1.05	≤0.025	≤0.025	0.8-1.05	0.9-1.2	0.22-0.30	0.02-0.05	0.40-0.60	/